These limits areĭesigned to provide reasonable protection against harmful interference in a residential installation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. * The endpoint address: An IPv4 address may look like 192.168.0.1, an IPv6 address may look likeĢ001:DB8:1:0:ABCD::1, and a hostname may look like: Statement The Ethernet cable (Cat5) can be up to 100 m (330 ft). Otherwise the Cisco Aironet Power Injector must be used. * The PoE source (network switch) must be located in the same building as the Cisco TelePresence Touch 10. * When ordering the Cisco TelePresence Touch 10 as a spare part the Ethernet cable and cleaning cloth is not included. Tap Start Pairing or Select codec manually.
If the Touch device is connected directly to the endpoint the pairing process is runĪutomatically in the background. Either, connect the Ethernet cable from the injector to the Ethernet.Injector, and then choose one of the two options: If using a power injector, connect the Ethernet cable from the Touch to the If Power over Ethernet (PoE) is available in the room, connect the EthernetĬable from the Touch to the Ethernet (PoE) port in the wall/router. If Power over Ethernet (PoE) is supported by the endpoint, connect theĮthernet cable from the Touch to the Ethernet (PoE) port ( If none of the above options apply use the Cisco Aironet Power Injector which canīe ordered separately (CTS-PWR-AIR-INJ5).įirst connect the Ethernet cable to the Touch device, then choose option A, B or C:.
The user documentation of your endpoint to find if it supplies power over one of its The TelePresence endpoint can have an Ethernet port with support for PoE.The LAN socket in your wall (network switch) or router can have support for PoE.Ĭontact your IT administrator to check if PoE is available.If required, contact your system adminstrator The address* of the TelePresence endpoint is announced on its main screen. The Cisco TelePresence Touch 10 has an Ethernet port with support for PoE *. Video conferencing systems (also named codec or endpoint). The Cisco TelePresence Touch 10 can be used with a wide range of Cisco TelePresence
0 kommentar(er)
